JMK CLOCKstep:MULTI Manual page 17

CLOCKstep:MULTI
Global Se ngs (con nued)
MIDI RX Channel
The MIDI Channel that CLOCKstep:MULTI responds to when receiving remote
MIDI Commands. Value = 1-16.
Audio IN Threshold
Useful for calibra ng the Sample Accurate Clock Sync feature to match the
level of the audio signal being received. When pressed, a new screen will
appear for choosing a threshold se ng (blue light) between 1-16. Lower
se ngs will detect peaks in the audio at a lower threshold.
If there is any signal present at the Audio Input, then a er a few seconds the
se ng (blue) could change and you may see a Red and Green lights appear.
This is the auto-calibra on sequence running.
The Red light represents the noise floor of the signal.
The Green light represents the highest peak detected in the audio, which
should be the peak of the incoming audio clock pulses.
Select a se ng (blue) somewhere between the Red and Green levels. The
auto-calibra on will make a recommenda on for this se ng, but you don't
have to accept it. You can select any of the 16 values you wish.
Transport Mode
Pressing this bu on will display
the possible Transport Mode
se ngs.
Transport Modes are detailed in
the Transport and Clock chapter.
con nued ...
Copyright 2023 JMK Music Pedals
View Synchronize Video (Input Calibration Chapter)
version 1.0 (build 0050)
Resync
Simple
Indepe-
ndent
JMK MUSIC PEDALS
Align
Quantize
17