Sync Rates - JMK CLOCKstep:MULTI Manual

CLOCKstep:MULTI

Sync Rates

The rate of the two (2) 3.5mm CV Trigger
Sync outputs can be adjust to match the
rates expected by the external gear that
they control.
Each output can have its own independent
rate.
Begin to adjust the rates by pressing the
SYNC 1 | 2 bu on.
View Synchronize Video
Sync 1 | 2
Pressing the SYNC 1 | 2 bu on will
display the choices shown to the right.
Press bu on 1 or 2 to set the sync rate
for the related 3.5mm output.
The blue bu on at the Bo om Right exits
back to the main view without making
any choices.
Rates
In the sequencing world, sync rates are
normally expressed in PPQN (pulses per
quarter note), indica ng the number of pulses or clock cks expected during
the span of 1 Quarter Note.
PPQN is also used as a rate designa on within CLOCKstep:MULTI, but there
are a couple excep ons. Very slow rates are expressed as PPM (pulses per
measure).
You may find other designa ons used by sequencers such as PPS (pulses per
step). You want to pay close a en on to the designa on used for sync rates
and what they mean.
con nued ...
Copyright 2023 JMK Music Pedals
version 1.0 (build 0050)
PLAY RESET
START STOP
JMK MUSIC PEDALS
MUTE
PRESET SOUND
3 4
2 2
SYNC SYNC TEMPO
1 2 1 2
1 2
VOLUME
TRIPLET
13