JMK CLOCKstep:MULTI Manual page 10

CLOCKstep:MULTI
Tempo (con nued)
Tempo Decimal
If you'd like to enter a 1 point decimal
value, press the white bu on at the final
stage, which is in the same place as a
calculator 10-key decimal. A 10-key layout
will appear again, wai ng for you to input
one more value.
A er inpu ng the decimal value, you will be given only the op on of
Execu ng or Cancelling again.
Read the Tempo
Some mes you need to know what tempo CLOCKstep:MULTI is currently set
at. This is where that green light shown within the 10-key layout comes into
play.
To read the current tempo, press the Tempo key for 2 seconds to bring up
the calculator 10-key. The green light show in the 10-key is the current
value used. Follow pressing the green lights within the 10-key and you will
be re-entering the same BPM value that is currently running. Once at the
last stage, you can either Execute or Cancel.
External Clock Tempo
When CLOCKstep:MULTI is following an External Clock, the Tempo bu on is
deac vated. Tempo can only be set by the External Clock device. See the
External Clock Sync chapter for more details.
Copyright 2023 JMK Music Pedals
version 1.0 (build 0050) JMK MUSIC PEDALS
4
2 3
SYNC TEMPO
1 2
10