Sound; Audio Adjustments - Aiwa Z-L100 Operating Instructions Manual

1 Press ECO once.
"ECO MODE' will be displayed.
2 Press If within 4 seconds.
The current power-economizing mode status will be displayed.
If the power-economizing mode is off: ECO OFF.
If the power-economizing mode is on: ECO ON or ECO AUTO.
3 Within 4 seconds, press << or >} repeatedly
to select the power-economizing mode.
Example: When "ON" is selected.
4 Press fl within 4 seconds to set the mode.
To view the clock when all the saa lights turn off, press CLOCK
on the remote control while pressing SHIFT so that the time is
displayed for 4 seconds.
When using the main unit, press Il SET.
Standby power consumption
If the power-economizing mode.is OFF: 15W
If the power-economizing mode is AUTO or ON: 0.9W
VOLUME
T-BASS
SHIFT
T-BASS VOL
PHONES
Bh oop TU oon isc site eee ela ae Ue ke
VOLUME CONTROL
Turn VOLUME on the main unit, or press VOL A or
/ on the remote control.
The volume level is displayed as a number from 0 to MAX (31).
The volume level is automatically set to 16 when the power is
turned off with the volume level set to 17 or more.
'PERPRESESSSA SST Ea SAE SETAE AE AIEES SSSA EES SSRHE REISE I SAOUEARNES PRS Ahn nda E CREE EES SAETERE SSS
SUPER T-BASS SYSTEM
The T-BASS system enhances the realism of low-frequency
sound.
Press T-BASS.
Each time it is pressed, the level changes. Select one of the F
three levels or the off position to suit ot ieee n
To select with the remote control
Press T-BASS while pressing SHIFT.
Low frequency sound may be distorted when the T-BASS system ~
is used for a disc or tape in which low frequency sound is already
emphasized. In this case, cancel the T-BASS system.
Using the headphones
Connect headphones to PHONES jack with a standard stereo
plug (96.3 mm, '/4 inch).
No sound is output from the speakers while the headphones are
plugged in.
ENGLISH ©