Adjusting The Sound - Aiwa NSX-V8000 Operating Instructions Manual

Compact disc stereo system
Hide thumbs Also See for NSX-V8000:
Table of Contents

Advertisement

ADJUSTING THE SOUND
Your speakers feature the Front 180° system with uni-directional
speakers and built-in surround speakers pointed inward at angles
of 45°. You can get an optimal stereo effect not only directly in
front of the speakers but also when off the center line between
the speakers.
BBE
GEQ
T-BASS
VOLUME
VOLUME CONTROL
Turn the VOLUME
control
on the main unit, or press the
VOLUME buttons on the remote control.
BBE SYSTEM
The BBE system enhances the clarity of high-frequency sound.
It also enriches the KARAOKE function to make your voice sound
clear and pleasant.
Press the BBE button.
Each time it is pressed, the level changes.
Select one of the
three levels, or the off position to suit your preference.
in
wtl
ttt
EGsi— Ea > EES; Ee
(cancel)
SUPER T-BASS SYSTEM
The T-BASS system enhances the realism of low-frequency
sound.
Press the T-BASS button.
Each time it is pressed, the level changes.
Select one of the
three levels, or the off position to suit your preference.
isi
will
GSS > GES > G55 >
Ss
(
cancel)
Low frequency sound may be distorted when the T-BASS system
is used for a disc or tape in which low frequency sound is originally
emphasized. In this case, cancel the T-BASS system.
GRAPHIC EQUALIZER
This unit provides the following three different equalization curves.
ROCK: Powerful sound emphasizing treble and bass
POP: More presence in the vocals and midrange
CLASSIC: Enriched sound with heavy bass and fine treble
Press the GEQ
button repeatedly until the desired
equalization curve is displayed.
(Rock —> POP—>CLASSIC—> EQoFF4
(cancel)
SOUND ADJUSTMENT DURING
RECORDING
The output volume and tone (except BBE) of the speakers or
headphones may be freely varied without affecting the level of
the recording.
Recording with BBE
The desired source can be recorded with the BBE function to
enhance the clarity of high-frequency sound. When playing back
a tape recorded with BBE, it is recommended that BBE be set to
off.
Using the headphones
Connect headphones to the PHONES jack with a stereo standard
plug (96.3 mm, 1/4 inch).
No sound is output from the speakers while the headphones are
plugged in.
ENGLISH 6

Advertisement

Table of Contents
loading

Table of Contents