Mitsubishi Electric CITY MULTI PKFY-WL18NKMU-E Technical & Service Manual page 13

8-3. FAN OPERATION
RETURN SELECT
MENU
HOLD
.
Control Mode
1. Temperature Set by remote controller.
adjustment
function
4 speeds + Auto type
When [Auto] is set, fan speed becomes [Low].
2. Drain pump 2-1. Drain pump control
ON for 3 minutes after the operation mode is switched from COOL or DRYING to another
operation mode (FAN).
control judges the sensor is in the water.
2-2. Float switch control
• Float switch control judges whether the sensor is in the air or in the water by turning the
In the air
3. Vane Same as the control performed during the COOL operation, but with no restriction on the vane's
(up/down vane
downward blow setting
change)
TCH121
<How to operate>
ON
OFF
<How to operate>
Control Details
Type
Auto
Press ON/OFF button.
Press [F1] button to display FAN.
Press POWER ON/OFF button.
Press the operation MODE button to display FAN.
Fan speed notch
13
Remarks
• Operates as it would
in COOL operation.