Table of Contents
Advertisement
A reading which has been determined by using the "Standard Measurement" automatically serves as a
reference value. You can add one or more sample measurements to this reading. To do so, you have to
switch to the "Sample Measurement" screen:
1. Press the Enter button
function. Now you get to the "Sample Measurement" screen.
2. Take a measurement (just like you did in the standard measurement).
3. Now you can see the results and the deviation to the standard in the following screen:
Note: While the measurement is in progress (time duration: ~ 1 second), all buttons are inactive.
To go back to the standard measurement screen, press Back
5.3
Additional functions
5.3.1
Records
All measuring results are recorded and saved to the internal memory of the colorimeter (if auto save is
active). To view the recorded data, press the Menu button
confirm. Now, you get to the following screen:
Here you can navigate between the different readings by using the arrow keys (
Manual
when you are in the results screen of the standard measurement
8
.
, select "Record" and press Enter to
and
).
Advertisement
Table of Contents
