Measurement Functions; Operation; Preparation; Functions - PCE Instruments PCE-EM 890 User Manual

5

Measurement functions

Measuring function
Wind / air speed
Temperature
Volume flow
Wind chill
Humidity
Temperature
Dew point
Wet bulb temperature
Heat index
UV radiation (UVA)
Air pressure
Altitude above sea level
External temperature via Pt1000
The units of measurement in brackets are the display representations that differ from the unit of
measurement.
6

Operation

6.1

Preparation

Open the battery compartment on the back of the device by turning it slightly to the left and insert
the CR 2032 3 V battery, observing correct polarity. Close the battery compartment.
6.2

Functions

6.2.1 Switch meter on / off
•
Press the "Power" key to switch on the meter.
•
To switch off the meter, press and hold the "Power" key until it switches off.
6.2.2 Display backlight
•
Press and release the "Power" key when the meter is switched on.
•
The display backlight switches on for 5 seconds.
6.2.3 Select measuring function
•
Press and hold the "Hold" key when the meter is switched on.
•
The display shows the measuring functions one after the other.
•
Release the key as soon as the desired measuring function is displayed.
Display text Unit of measurement
m/s, km/h, mph, Knot, FPM
AN
°C, °F
AirFL CMM, CFM
CHiLL °C, °F
% r. F.
rH
°C, °F
dP °C, °F
_Et °C, °F
HEAt °C, °F
U A mW/cm², µW/cm², automatic
bAr hPa (HPA), mmHg (mH9), inHg (inH9)
HigH m, Ft
Pt °C, °F
© PCE Instruments
5