universalblue MISTRAL 3052 User Manual page 32

Note: Fastening screws (included) are designed for use
with the fan and are fastened to wooden beams. If the
installation is carried out on a different material, it is advisable to
use the appropriate fixing screws for that material (these screws
are not supplied with this equipment).
STEP BY STEP
Please consider the images for guidance only. In no case
these images correspond to the final model purchased.
Assembly of the blades (C)
Remove the screws from the accessory bag or unscrew them
from the bottom of the lamp structure (B). Depending on the
model purchased, each blade may have 1, 2 or 3 screws. Fit each
blade into the slots of the main fan body provided.
Secure each blade with the supplied screw. Tighten all screws to
the blades evenly to prevent the fan from swinging.
32