universalblue MISTRAL 3052 User Manual page 31

WHERE TO INSTALL
 Make sure that the place where the fan is going to be
installed is quite wide, as this will allow a better air flow and
that the fan blades do not come into contact with any object,
minimum space of 0.6m on each side.

Do not place the fan in an open space, or in a room where
there is moisture or exposure to water.
 If the chosen location does not have a suitable support beam
capable of supporting 45Kg, install a 2"x4" support between
the roof beams as a support medium.
 Make sure that the bracket for hanging the fan to the ceiling
or other suitable structure is capable of supporting at least
45Kg, with the two long fixing screws included. Make sure
that at least 30 mm of the screw is screwed into the bracket.
 Only the fans with a support rod or bar can be installed on
sloping roofs where the angle of inclination does not exceed
25º. This model cannot be installed on sloping roofs.
Our fans are not designed to be installed in plasterboard or
false ceiling, as these materials may not support 45kg
31