Table of Contents
Advertisement
4070VR/1060VR [En/K)
B Hold your remote ty the speaker portion of
your telephone.
* For each setup code the operator can supply a setup code number.
Should you ever need to change your input configuration, this number
canbe used. Please record for your future reference. If for some reason
this information is lost, see "Checking a setup code" in the "Setup code
correlation' section for further information.
Code selection after mode download
After successful completion of the download, step 5 above, the remote control automatically enters a special set-up mode which works
as described below.
Sclect the component for which you want
to register the information downloaded
above.
Press the VIDEO, AUDIO, or TV
VIBES key
AUDIO key
key,
key repeatedly to select the de-
@ VIDEO1 (VCR 1)
@ CD (CD)
@TV1
sired component.
[" ® VIDEO2 (VCR 2)
@ TAPE/MD
© T1v2
@ VIDEOS (LD)
(TAPE)
@ CABLE
@ PHONO
* Example 1 : To register a code at the component connected to the
VIDEO 1 jocks, select "VIDEO 1 (CN)
IS
7357
Perform each of the following steps within
5 seconds.
2 | Press a numeric key.
THEME
MENU
* Press the 1 key to output the POWER code of the first component on
your list in step fl of the previous page. Continue to push buttons 2
through 9 {and 0) until the component you want to register turns on.
* Though the FutureSet memory in your remote control is quite large,
only 10 setup POWER codes can be put on the 10 keypad at any one
time. If you require a larger download, the standard setup procedure
can be used. See "Registering setup codes for other components", your
customer service representative can supply you with the downloaded
setup code numbers.
W/Sal/vin
INFO
ALT AUD
+700
REPEAT
RANDOM
C7 Ce Cs)
BICPLAy
Repeat steps 1 and 2 to register all of the
downloaded information.
The setup code for the last POWER
code to be sent in step Bl is
automatically registered at the location selected in step Hl.
Hold down the ENT key until the backlight
flashes twice.
a
* At this time, the remote exits the special set-up mode and returns to
ite normal oporation mode
Advertisement
Table of Contents
