Set Up Homekit (Optional, Ios Only) - Yale Assure Lock 2 Touch Manual

11

Set Up HomeKit (Optional, iOS Only)

If you do not wish to set up HomeKit, please replace battery cover and proceed to step 12.
Enabling the HomeKit integration allows you to connect your lock and control it
from your iPhone with the Apple Home app.
1. To enable HomeKit, make sure your lock is installed and set up with Yale Access
app. In the Yale Access app lock settings select "HomeKit" to begin HomeKit setup.
2. To begin setup, you'll need access to the 8-digit HomeKit accessory code located
on the side of the lock under the battery cover. Follow the instructions in the Yale
Access app to set up HomeKit.
Note: If you have HomePod®, HomePod Mini®, or Apple TV® set up as a home hub, to ensure
successful HomeKit setup, make sure they are online and connected.
Sharing access to your lock in Home app with others and controlling this HomeKit-
enabled accessory away from home requires a HomePod®, HomePod mini®, or
Apple TV® set up as a home hub. To operate the lock from the Home app, all invited
Home app users are required to be owners of the lock in Yale Access app.
P/N YRD450-KF-F Rev A
24
2