Advertisement
UNPACK
1. Cut the straps and the line
printed on the top of the
washer carton. Lift to remove.
Discard braces and corner
posts. Remove any packaging
and accessories from the drum
and base packer.
Dispose of packaging
responsibly.
2. Cut the straps and tape to
open the plinth carton from
the top. Remove the EPS cap
before lifting the plinth out.
Set cardboard aside for later
use. Ensure accessories are
removed from the EPS cap
before discarding EPS and
rubber spacers responsibly.
3. Protect flooring before
positioning washer as close
to the installation location
as possible, ensuring enough
working room is left available.
5
Advertisement
