Advertisement
CONNECT CABLES AND HOSES
7A. Standpipe Installations:
Route the drain hose through
the guide and place into the
20mm
standpipe.
Ensure a maximum of 20mm of
the hose rests in the standpipe.
7B. Spigot Installations:
Drill out blanking insert from
the spigot.
Route the drain hose through
the guide and place into the
spigot. Secure using a hose
clamp.
8. Connect hoses to taps
before turning on. Check for
leaks at all connection points.
If possible, recheck for leaks 24
hours after installation.
15
Advertisement
