Kenmore AquaLITE HF5010 Use & Care Manual page 20

BRUSH ROLLER SELF-CLEANING
NOTE:
While the brush roller
is self-cleaning, press the self-
cleaning button again, self-
cleaning will stop and the DWT
full indicator will flash. Empty
and clean the dirty water tank
immediately to avoid odor, see
instructions in EMPTYING THE
DIRTY WATER TANK (page 17-18).
4. When the hard floor cleaner
completes brush roller self-
cleaning, the brush roller self-
cleaning indicator turns off. The
cleaner returns to charging and
roller air drying state.
1. Place the hard floor cleaner on
the storage base to air dry the
brush roller for about 4 hours
after cleaning.
CLEANING THE BRUSH ROLLER COVER
1. Grab the brush roller cover
while pressing the brush roller
cover release button and pull
upward to remove the brush
roller cover.
BRUSH ROLLER AIR DRYING
5. Empty and clean the dirty
water tank.
NOTE:
During brush roller
self-cleaning operation, if the
brush roller tangled indicator, or
CWT lack of water indicator, or
DWT full indicator flashes, self-
cleaning will stop. Please address
it promptly.
2. Ensure the dock station is
plugged in. The cleaner will
automatically charge and
air dry the brush roller. See
instructions in CHARGING AND
BRUSH ROLLER AIR DRYING
(page 12-14).
- 20 -
Brush Roller
Cover Release
Button