Kenmore AquaLITE HF5010 Use & Care Manual page 15

FILLING THE CLEAN WATER TANK
3. Fill the clean water tank with
tap water and formula. Ensure
the correct proportion of water
and cleaning formula is used by
referring to the formula label.
Do not exceed filling the clean
water tank over the Max line
indicated on the clean water
tank.
NOTE:
The recommended ratio
of cleaning formula and water is
1:20.
4. Close the tank cap back into
place.
5. Place the clean water tank back
into the hard floor cleaner. You
should hear a "click" if done
correctly.
WARNING
• To reduce the risk of fire and
electric shock due to internal
component damage, use the
provided cleaning formula
intended for use with the hard
floor cleaner. Once depleted,
call 1-877-531-7321 (US) / 1-844-
608-3081 (CA) to purchase a
new cleaning formula.
• Only use water under 104F°
(40°C). DO NOT USE HOT
WATER.
• Ensure the water level in the
CWT does not exceed the Max
line.
- 15 -
Click!