4.2 - Electrical data, units without options 150 and 6
■ Standard-efficiency units
30XW--/30XWH
Power circuit
Nom. power supply
Voltage range
Control circuit
Nominal start-up current
(1)
Circuit A
Circuit B
Option 81
Maximum start-up current
(2)
Circuit A
Circuit B
Option 81
Cosine phi
Nominal
(3)
Maximum
(4)
Total harmonic distortion
(4)
Maximum power input*
Circuit A
Circuit B
Option 81
Nominal current drawn
(3)
Circuit A
Circuit B
Option 81
Maximum current drawn (Un)*
Circuit A
Circuit B
Option 81
Maximum current drawn (Un -10%)
Circuit A
Circuit B
Option 81
Maximum power input with option 150B*
Circuit A
Circuit B
Option 81
Maximum current drawn (Un) with option 150B*
Circuit A
Circuit B
Option 81
(1) Instantaneous start-up current (maximum operating current of the smallest compressor(s) + locked rotor current or reduced start-up current of the largest compressor).
Values obtained at standard Eurovent conditions: evaporator entering/leaving water temp. = 12°C/7°C, condenser entering/leaving water temp. = 30°C/35°C.
(2) Instantaneous start-up current (maximum operating current of the smallest compressor(s) + locked rotor current or reduced start-up current of the largest compressor).
Values obtained at operation with maximum unit power input.
(3) Values obtained at standard Eurovent conditions: evaporator entering/leaving water temp. = 12°C/7°C, condenser entering/leaving water temp. = 30°C/35°C
(4) Values obtained at operation with maximum unit power input.
*
Values obtained at operation with maximum unit power input. Values given on the unit name plate.