Table of Contents
Advertisement
Touchpanel Interface
30 • Touchpanel Interface: Crestron Isys™ TPS-TPI
5. As shown below, move the file position slider (or click
to where to insert another file.
NOTE: The figure below shows the insertion point near the middle of the file. The
most common insertion points are at the end or beginning of the file.
File Insertion Point
6. Again, select Edit | Insert File as shown below.
Insert Another WAV File
7. Browse to the directory or folder that contains the next WAV file to be
inserted, and open the file.
8. Repeat the above three steps until all desired files have been inserted.
9. Proceed to "Set WAV File or Message Properties, Save, and Exit" on
page 31. To create another message, follow that procedure to step 9.
Crestron Isys™ TPS-TPI
Operations Guide - DOC. 5855
or
)
Advertisement
Table of Contents
