To Create Wav Messages From Individual Files - Crestron TPS-TPI Operation Manual

Touchpanel Interface
28 • Touchpanel Interface: Crestron Isys™ TPS-TPI

To Create WAV Messages from Individual Files

NOTE: To create messages by combining individual WAV files, the PC must be
equipped with audio capabilities (i.e., a microphone-input jack, a microphone,
multimedia speakers, and a recording program such as Microsoft Sound Recorder).
The examples in this appendix use Sound Recorder. If another recording program is
preferred, consult the manufacturer's directions.
NOTE: Although there are alternative methods for selecting the commands of the
application, the following procedure uses the PC mouse and pull-down Menu Bar.
To create messages from individual WAV files, perform the following procedure:
1. At the Windows taskbar, select Start | Programs | Accessories. For
Windows 95/NT, select Multimedia, for Windows 98, select
Entertainment. Select Sound Recorder and the Sound Recorder
opens as shown below.
Open Sound Recorder
2. Select File | New as shown below.
Create New File to Create Message
Crestron Isys™ TPS-TPI
Operations Guide - DOC. 5855