Table of Contents
Advertisement
Touchpanel Interface
14 • Touchpanel Interface: Crestron Isys™ TPS-TPI
The characteristics of the input signal are displayed centrally at the bottom of the
RGB Menu. For example, in the above illustration, the input signal has a resolution
of 1024 x 768 with a frequency of 60.9 KHz (horizontal) and 76.1 Hz (vertical). If
the input signal has the same video (plus or minus some noise) as one of the presets,
The Detected Preset box shows the value. For the sake of this procedure, Detected
Preset 16 is shown as an example. If there is no preset detected, the box shows 0 as
the value.
The TPS-TPI is capable of storing 16 VGA formats; the panel is factory set with the
presets empty. To assign a format to a preset, complete the following steps:
1. Select a preset button (numbered 1 through 16). For the sake of this
procedure, select 11.
2. Select the Display RGB button at the top of the RGB Menu to display
the screen after this step.
RGB Controls (Vertical Lines Portray RGB Sample)
3. While viewing the sample of the input signal, use the arrow buttons
around the Center button and then the other arrow buttons to position
and compress/expand the sample so that it fills the entire screen.
NOTE: The Center button only needs to be used if the sample disappears from the
screen while making adjustments in step 3.
4. While viewing the sample of the input signal, use the Phase Rev and
Phase Fwd buttons to adjust the timing of the sample.
5. If necessary, select the More Controls button to show additional
controls for RGB.
6. In the box beneath the characteristics of the input signal, confirm that
the Selected Preset number matches the one selected in step 1.
If 0 appears, no preset was selected in step 1. To correct, perform the
following steps (in sequence): 8, 1, and 2. Then continue with the next
step.
7. If visually satisfied with the sample, select the Save Preset button.
Otherwise use the buttons on the screen to make additional
adjustments.
8. At any time, the RGB Menu button can be selected to return to the
RGB Menu.
Crestron Isys™ TPS-TPI
Operations Guide - DOC. 5855
Advertisement
Table of Contents
