Viessmann VITOCELL 140-E Installation And Service Instructions Manual page 9

Fitting the lower thermal insulation mat and aligning the buffer cylinder
1.
A
2.
B
4.
3x
Fig. 2
Bag with type plate
A
Bag of 3 adjustable feet
B
Note
Adjust only 1 or 2 of the adjustable feet to level the cyl-
inder body. At least one of the adjustable feet must
remain fully screwed in.
Never extend the adjustable feet beyond a total length
of 35 mm.
Heating water buffer cylinder without Vitotrans and without Solar-Divicon
C
5.
3.
6. If no immersion heater EHE is installed, tightly seal
the front female connection
supplied.
with the R 1 plug
C
½
9