Viessmann VITOCELL 140-E Installation And Service Instructions Manual page 21
Hide thumbs
Also See for VITOCELL 140-E:
Advertisement
Fitting the cover strips
A
2.
Fig. 15
1. Tighten the nuts on the bolts.
2. Separate the cover strip at slot
section.
Heating water buffer cylinder with Vitotrans and without Solar-Divicon
3.
1.
4x
A
and fit the upper
3. Insert the side sections of the Vitotrans thermal
insulation. Observe the groove in the thermal insu-
lation.
21
Advertisement
