Heating water buffer cylinder with Vitotrans and with Solar-Divicon
Fitting the lower thermal insulation mat
Fig. 25
Fitting the thermometer sensor (if supplied) and buffer temperature sensors
2.
8.
1.
Fig. 26
Clamping device
A
Note
The cover hangs on the heating water buffer cylinder
and is held in position by the straight capillaries. This is
necessary for the rest of the installation.
30
5.
A
3.
A
!
4x
(cont.)
4.
6.
7.
Note
When the thermal insulation is being fitted, the buffer
temperature sensor leads are routed outwards through
the apertures (slots) in the rear cover strip.