System Specifications - Equinox Systems Micro-ISP IV Series User Manual

Micro-ISP

System Specifications

Minimum System Contents
The Micro-ISP Series IV programmer is available as either a +5V or low voltage version. The
minimum system contents for both versions are as follows:
• Micro-ISP Serial Download Programmer
• Windows Driver Software
• ISP Cable convertor
Micro-ISP Serial Programmer Specifications
Programmer Size
Shipped Weight
PC Connection
Programming Cable : Length 300mm
Header
Power Supply
Minimum PC requirements
The minimum hardware and software requirements to ensure that the programmer operates
correctly are as follows:
• 100% IBM compatible 386+
• Windows 3.1 or higher
• Minimum 4MB RAM
IV User Manual V2.03
Series
: 55 x 53 x 16mm
: Approx 0.10kg
: Serial Port 25-pin female D Connector
: 10-way IDC 0.1" pitch bump polarised
: Requires power from target system or external power supply.
Series IV Vcc. 4.8 - 6.0V
- I s (supply) approx 50mA when programming
- I s (supply) approx 27mA in standby
Series IV LV Vcc. 3.3 - 6.0V
- I s (supply) approx 36mA when programming @ 3.3V
- I s (supply) approx 22mA in standby @ 3.3V
- I s (supply) approx 70mA when programming @ 5V
- I s (supply) approx 37mA in standby @ 5V
• PC Serial extension cable set
• Atmel CD-ROM
• Minimum 1MB free hard disk space
• Spare PC serial port
3