Equinox Systems Micro-ISP IV Series User Manual page 19

Overview
The following tables detail the result of testing the programming of various target
microcontrollers in the laboratory. These timings and settings are meant for guidance only.
E&OE. Results may differ depending on microcontroller batch, power supply, target system
etc.
Definitions:
Voltage
Flash Write Time
EEPROM Write time - Minimum time to program a byte of the target microcontroller
Fspi
Fosc
Code time
Data time
All measurements were taken with the following equipment:
Meridian V2.12
PC - DX2-50
Micro-ISP Series IV LV
Windows 95
Communication speed: 56,000 baud
Micro-ISP
Device Programming Guide continued
- Supply voltage to programmer and target device
- Minimum time to program a byte or page (ATmega only) of the target
microcontroller FLASH area
EEPROM area
- Frequency of SPI signal from programmer to target device
- Frequency of target microcontroller oscillator
- Time taken to program the target device CODE area with random data
- Time taken to program the target device DATA area with random data
IV User Manual V2.03
Series
12