Equinox Systems Micro-ISP IV Series User Manual page 3

Electromagnetic Compatibility (EMC) Compliance
The Micro-ISP Programmer is a CE Approved Product. It is designed only for use in a
development environment only. This means that the user must ensure that there is no
possibility of damage from electrostatic discharge (ESD). Since the devices and equipment to
which this product is likely to be connected may well themselves be susceptible to ESD, this
should not pose any difficulty.
For example, if you are handling microcontrollers and EEPROMS etc. then you will already be
used to appropriate precautions, such as the use of anti-static mats, wrist straps and so on.
You should treat your Micro-ISP with the same care as you would these type of device.
Always ensure that you are not yourself carrying a static charge before handling the product.
Wearing an earthed anti-static wrist strap is recommended.
Equinox have taken great care in designing this product to be compliant with the European
EMC directive. When using the equipment be sure to follow the instructions provided.
Although RF emissions are within prescribed limits, care should be taken if you are using the
product near to sensitive apparatus. If you experience any difficulty please refer to Equinox
technical support.
Please Note:
This equipment is designed for use in a 'Development Environment' only and is
NOT guaranteed to operate correctly in a 'Production Environment'.
Use of this product in a 'Production Environment' will invalidate your warranty.
Micro-ISP
ESD Points to remember
Work in a static-free environment.
Wear an earthed wrist strap when handling either the programmer
and/or any programmable device.
IV User Manual V2.03
Series
ii