Table of Contents
Advertisement
7.
Unpacking the 2-Post Rack Installation Hardware
Verify that the ship kit includes the following installation hardware
Installation Hardware
n
Two power
cords*
n
A set of 2-post rack mounting
(Eight) M5 x 12
Phillips flat head screws
n
Two pairs of 2-post rack mounting brackets
Inside front view
n
A pair of 2-post rack mounting brackets with threaded holes
Inside front view
n
A pair of 2-post rack assemblies that attach directly to the rack
2 Post Rack rail assembly, inside view
2 Post Rack rail assembly, outside view
INSIGHT DLP SENSOR 310, 310NTC & 310NTF Appliance Hardware Installation Guide
hardware**
(Twenty-two) M4 x 4
Phillips truss head screws
4 (Four)
Fixed 2-post rack brackets
Outside front view
2 (Two)
Fixed 2-post rack brackets
with threaded holes
Outside front view
(Two) 10-32 x 3/4"
Phillips pan head screws
(used to secure the appliance in the rack)
NOTE:
Use the hardware
supplied with your specific
rack if different from the
hardware supplied in this kit.
*
NOTE:
Only two power cords
will be included in your
ship kit even if you receive
multiple rail kits.
**
NOTE:
There may be
additional mounting
hardware included that will
not be used with this
installation assembly kit.
www.insightdlp.com
Page 9
Advertisement
Table of Contents
