Table of Contents
Advertisement
5B. 4-Post Rack Installation with Quick Mount Rails
Locate the quick mount rack rail assemblies shown below
Step 1
Locate the two adjustable quick-mount
rack rail assemblies.
n
Insert the tabs on the front section of the
adjustable rack rail assembly through the
openings in the rear sections of the assemblies.
n
Check to make sure the adjustable rack rail
assemblies are connected correctly, then slide
the front section forward and the rear section
back to keep them from coming apart. These
assemblies adjust to accommodate different
rack depths.
Step 2
n
Quick-mount rail Installation in the
square hole rack:
A.
Insert the quick-mount rail tabs
on the front of the rack rail
assembly through the selected
set of square holes in the rack.
NOTE:
There is a threaded hole between
the two quick-mount tabs in the rail
assembly. This hole will be used to
secure the appliance in the rack later
in this guide.
B.
Push the tabs into the holes in the rack
until you hear the locking mechanism
on the rail assembly click into place.
The locking mechanism secures the rails
to the rack.
C.
Slide the rail assembly to the back of
the rack.
D.
In the rear, insert the quick-mount rail tabs
through the square holes level with the front
installation.
E.
Push the tabs into the holes until you hear
the rear locking mechanism click into place.
n
Repeat these steps for the other side of the
INSIGHT DLP SENSOR 310, 310NTC & 310NTF Appliance Hardware Installation Guide
Rack bracket tab
Adjustable quick-mount
rack rail assemblies
4-post
rack
A
Quick-mount
rail tabs
(side view)
B
Quick-mount
locking
mechanism
*
NOTE:
Make sure the quick-mount rail assemblies are
aligned in the rack not only in the front and back, but
are level in height on the left and right sides for proper
rack.*
alignment for appliance installation.
(square hole rack only)
Rack bracket tabs
Rear section of
the adjustable
rack rail assembly
Front section of
the adjustable
rack rail assembly
Empty
hole
C
D
Quick-mount
rail tabs
(angle view)
Empty hole
Quick-mount rail
locking mechanism
www.insightdlp.com
E
Page 7
Advertisement
Table of Contents
