Raider RD-PH01 User Manual page 13

13
OPERTAION YOUR HEATER
1.Control part
2.Instructions for use
FREE MODE
1.Press the switch button , when you hear the buzzer sound, the display lights up, showing the current
ambient temperature.
2.Power adjustment: press the setting key again Turn on heating mode, keep pressing . For switching
between full power and half power, at this time full power The red indicator light is off, and the half power
red indicator light lights up.
3.Temperature adjustment: press the up and down keys it is the temperature adjustment, the default
temperature is 35 degrees, and the temperature adjustment range is 5-50 degrees. (No operation flashes for
5 seconds and automatically switches to ambient temperature)
4.Timing setting: press the timing key display shows 00, timing indicator flash, 00 means that when it is
not fixed, press the up and down keys timing time can be adjusted, the timing range is 1-24 hours. In the
timing state, the timing indicator red lights up.
5.Child lock function: long press the switch three seconds, the child lock function is enabled, the child
lock red indicator light lights up. In the case of child lock lock, long press the switch three seconds,
the child lock function is released, and the red indicator light is off.
6.Window opening function: In all heating modes, when the room window is opened and the room temperature
drops by 15°C or above within 2 minutes, the product will automatically stop heating, and the window-opening
mode has a red indicator light lights up. After 5 minutes, the product will automatically return to the current
working mode, and the red indicator light will open the window off, or press and hold the up and down keys
within ten minutes three seconds, you can also restore the current working mode.