Cleaning The Steam Jet; Cleaning The Cup Rim Sensor; Cleaning The Milk Siphon - Miele CM 7750 CoffeeSelect Operating Instructions Manual

Cleaning the steam jet

Clean the steam jet once a month.
 To move the central spout into the
maintenance position, touch  for
3 seconds.
 Carefully pull the stainless steel cover
off.
 Remove the dispensing unit to the
front.
Push the cleaning brush a max.
of 1 cm into the steam jet.
 Clean the steam jet with the cleaning
brush.
 Refit the dispensing unit into the
central spout.
 Refit the stainless steel cover.

Cleaning the cup rim sensor

Clean the cup rim sensor every day.
The cup rim sensor is located under the
central spout.
Cleaning and care
 Press the two latches together (see
arrows).
The cup rim sensor is released.
 Clean the cup rim sensor by hand
with warm water and a little washing-
up liquid.
 Dry the cup rim sensor.
Refitting:
 Press the cup rim sensor from below
into the holder on the central spout.

Cleaning the milk siphon

Clean the milk siphon every day.
 Rinse the milk siphon under running
water.
 Remove the connecting piece from
the stainless steel tube.
 Clean the parts by hand under
running water with a little washing-up
liquid.
 If necessary, soak the parts overnight
in water and a little washing-up liquid.
 Rinse the parts under running water
afterwards.
 Dry the parts.
71