Cleaning the steam jet
Clean the steam jet once a month.
To move the central spout into the
maintenance position, touch for
3 seconds.
Carefully pull the stainless steel cover
off.
Remove the dispensing unit to the
front.
Push the cleaning brush a max.
of 1 cm into the steam jet.
Clean the steam jet with the cleaning
brush.
Refit the dispensing unit into the
central spout.
Refit the stainless steel cover.
Cleaning and care
Cleaning the cup rim sensor
Clean the cup rim sensor every day.
The cup rim sensor is located under the
central spout.
Press the two latches together (see
arrows).
The cup rim sensor is released.
Clean the cup rim sensor by hand
with warm water and a little washing-
up liquid.
Dry the cup rim sensor.
Refitting:
Press the cup rim sensor from below
into the holder on the central spout.
67