Table of Contents
Advertisement
Scalable Resolution
System Configuration
The two NL4s are wired in parallel so either can be used as a
nominal 'input' or 'link' output.
When the system is configured for a single box resolution system
each cabinet is connected to a single amplifier channel.
In 2 box or lower resolution, the connection is made from an
amplifier channel to the 'input' of one cabinet, and the second
'link' NL4 is used to make a parallel connection to an adjacent
cabinet.
WPM USER GUIDE V2
Copyright © 2023 Martin Audio Ltd.
The maximum is 4 box resolution with four cabinets connected to
a single amplifier channel.
Connection goes to one cabinet with links between the three
cabinets below in daisy-chain fashion going from link out to input
on the next cabinet.
26
WPM USER GUIDE
Advertisement
Table of Contents
