Rigging - Martin Audio WAVEFRONT PRECISION WPM User Manual

Optimised line array

Table of Contents

Rigging

Once this is complete you can refine how the array is deployed.

Choosing for example between a two point hang and a single point

for which the application will display the best position on the flying

frame to give the nearest angle to the optimised aim.

The actual physical angle that the hole in the frame will achieve will

be displayed with the option to use this angle in the optimisation

so that the array EQ is optimised for the actual physical position in

which the array is installed.

With the physical deployment done you can progress to optimise

the EQ. Again you can enter the environmental conditions and

can balance the three goals of response in your audience region,

leakage to non-audience and the hard avoid performance.

WPM USER GUIDE V2

Finally the load on each flying point is shown and critically the

Rig tab shows if the array is safe and meets both BGVC1 and

DIN18800 standards.

By default each are given equal importance but if your application

demands particular emphasis on any one of these parameters they

can be given greater importance.

WPM USER GUIDE

Table of Contents