Section 5
Starting up
IEC17000144 V1 EN-US
Figure 6:
Setting up the PC or workstation for point-to-point access to IEDs rear
port
An ethernet cable (max 2 m length) with RJ-45 connectors is needed to connect two physical
Ethernet interfaces together without a hub, router, bridge or switch in between.
1.
Select Search programs and files in the Start menu in Windows.
26
Error message upon changing the IP address
If an IED is equipped with optical LC interface, a converter between RJ-45 and LC is
needed.
© 2017 - 2023 Hitachi Energy. All rights reserved
1MRK511447-UEN Rev. E
IEC17000144-1-en.vsdx
Switchgear control unit SAM600-IO
Commissioning manual