Bosch Professional GCM 254 D Original Instructions Manual page 33

Intended Use
The power tool is intended as a stationary machine for mak-
ing straight cuts in wood with and against the grain. Mitre
angles of –47° to +52° as well as bevel angles of 45° (left-
hand side) to 45° (right-hand side) are possible.
The power tool is designed with sufficient capacity for saw-
ing hardwood and softwood as well as chipboard and fibre-
board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
This product is a consumer laser product in accordance with
EN 50689.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Locking screw for slide device
(2) Slide device
(3) Laser warning label
(4) Transport handle
(5) Handle
(6) Lock-off function for On/Off switch
(7) Protective guard
(8) Retracting blade guard
(9) Mounting holes
(10) Insert plate
(11) Lock button for mitre angle
(12) Locking knob for all mitre angles
(13) Lock button for bevel angle
(14) Angle indicator for mitre angles
(15) Detents for standard mitre angles
(16) Saw table extension
a)
(17) Workpiece support
(18) Fixed fence
(19) Adjustable fence
(20) Screw clamp
(21) Adjustment knob for 0° bevel angle
(22) Depth stop
(23) Depth stop adjusting screw
(24) Hex key
(25) Transport Safety Lock
(26) Length stop
Recessed handles
(27)
(28) Mounting holes for horizontal fixing
(29) Saw table
(30) Scale for mitre angles
(31) Tilt protector
(32) Guide roller
(33) Spindle lock
Bosch Power Tools
(34) Laser beam outlet aperture
(35) On/off switch
(36) On/Off switch for laser (cutting line indication)
(37) Chip ejector
(38) Wing bolt for fixing the adjustable fence
(39) Holes for screw clamp
(40) Stop screw for right-hand bevel angle range
(41) Standard bevel angle stops 45°, 22.5° and 33.9°
(42) Clamping screw for saw table extension
(43) Securing screw for saw table extension
(44) Opening for workpiece support (on power tool)
(45) Opening for second workpiece support (on work-
piece support)
(46) Dust bag
(47) Hex socket screw for mounting the saw blade
(48) Clamping flange
(49) Saw blade
(50) Inner clamping flange
(51) Wing bolt for adjusting the height of the threaded
rod
(52) Threaded rod
(53) Wing bolt for screw clamp
(54) Screw clamp pins
(55) Angle indicator for bevel angles
(56) Scale for bevel angles
(57) Clamping screw for length stop
(58) Guide rail for length gauge
(59) Wing bolt for fixing the guide rail for length gauge
(60) Screws for insert plate
Set screw for positioning the laser
(61)
(62) Set square
(63) Stop screw for 0° bevel angle
(64) Hex socket screw for fence
(65) Screw for bevel angle indicator
(66) Screw for mitre angle indicator
a) Not available in all country-specific versions.
Technical Data
Sliding Mitre Saw
Article number
Rated power input
No-load speed
Laser type
Laser class
Weight according to EPTA-Pro-
cedure 01:2014
English | 33
GCM 254 D
3 601 M53 0..
W 1800
–1
min 4800
nm 650
mW < 1
2
kg 17.9
1 609 92A 88N | (29.03.2023)