Connecting The Aerial - Sony TRINITRON KV-14M1A Manual

6
Getting Started
Inserting the Batteries into the
Remote Commander
1 Turn the TV upside down onto a soft base.
2 Check that the arrows point forward and clip the
swivel to the base of the TV.
3 Turn the TV again.
4 Use the tilt-swivel to bring the TV into the optimum
viewing position.
Note « To remove the tilt-swivel, check that the arrows are
pointing forward, pinch the clip of the swivel
and pull away from the base of the TV.
Getting Started
Connecting the Aerial
if you connect a VCR, skip to step 4.
ri Mt
ETI
H FR
{eG
tl),
fi
Connect an external aerial to the
socket ff.
Where an external aerial is not
available connect the indoor aerial
supplied:
1 Insert the supplied aerial into the opening on top of
the set.
2 Connect the aerial to the socket K@ on the rear of the
set.
3 Adjust the aerial for optimum reception.
Getting Started 7