Sony KD-28DL11U Quick Start Manual

KD-28DL11U
KD-28DX51U
KD-32DC11U
KD-32DX51U
Thank you for choosing this
FD Trinitron Integrated
Digital Television
This step by step guide will help you to:
Check the supplied accessories,
Insert batteries into the remote control,
Connect an aerial to the TV,
Connect a video cassette recorder (VCR) to the TV,
Switch on the TV,
Tune the TV,
Get to know the remote control.
®
© 2004 Sony Corporation
1
Checking the supplied
accessories
Remote control
2
Inserting batteries into
the remote control
Always remember to:
• observe the correct polarity when inserting batteries,
2-318-616-02
• dispose of batteries in an environmentally friendly way.
Printed in UK
3
Rear of TV.
Batteries
RF lead
1. Connect your aerial lead to the socket labelled
2. Connect an RF lead from the socket labelled
labelled IN* on your VCR.
3. Connect the supplied RF lead from the socket labelled OUT* on your VCR to the
socket labelled
4. Connect a fully wired 21-pin scart lead from the socket labelled i2/r on the rear
of the TV to socket labelled TV* on your VCR.
5. Insert a pre-recorded tape into the VCR and press the 'PLAY' button. This enables the
TV to locate and store the video channel during the 'Automatically tuning the TV'
procedure.
z *Socket names may vary depending on make and model of VCR. Refer to your VCR instruction
manual for details.
**If your VCR does not have a scart socket follow the connecting instructions above ignoring the
scart lead connection.
Connecting an aerial only
1. Connect your aerial lead to the socket labelled
2.
Connect the supplied RF lead from the sockets labelled
rear of the TV.

Connecting an aerial

and VCR to the TV
Supplied RF Lead
Rear of VCR
on the rear of the TV.
DIGITAL
on the rear of the TV to the socket
on the rear of the TV.
ANALOGUE
on the rear of the TV.
DIGITAL
and
ANALOGUE
on the