Sony TRINITRON KV-14M1A Manual page 3

KV-14M1/14T1
[RM-836]
Remote control system Infrared control
Power requirements 3V dc (2 batteries) R6 (size AA)
Dimensions Approx. 210x45x24 mm (w/h/d)
Weight Approx. 90g (Not including battery)
KV-14M1L
Front in (3)
AKB in 16:9 mode
PON
| ONT NT
Txt/FLOF ON ON
(14T1A only) | (14T1B only) | (14T1D only) | (44T1E only) | (14T1K only)
(14T1L/14T1U only)
OFF OFF OFF
OFF
OFF
OFF
OFF OFF OFF
OFF OFF OFF
ON ON
TOPText
OFF
OFF
OFF
OFF OFF OFF
OFF
OFF OFF OFF
OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
ON ON
[ore [ore [ork | or
ae a
ore [ore [ork [on
[—orr [ore or [ore
[on [ore or [or
Torr [ore or
[or [ore [ork [on
[or [oF
on
Language Preost | tain
WARNING ( KV-14M1L/14T1L/14M1U/14T1U only )
The flexible mains lead is supplied connected to a B.S. 1363 fused
plug having a fuse of 5 AMP capacity. Should the fuse need to be
replaced, use a 55 AMP FUSE approved by ASTA to BS 1362, ie
one that carries the mark.
IF THE PLUG SUPPLIED WITH THIS APPLIANCE IS NOT
SUITABLE FOR YOUR SOCKET OUTLETS IN YOUR HOME.
IT SHOULD BE CUT OFF AND AN APPROPRIATE PLUG FITTED.
THE PLUG SEVERED FROM THE MAINS LEAD MUST BE
DESTROYED AS A PLUG WITH BARED WIRES IS
DANGEROUS IF ENGAGED IN A LIVE SOCKET OUTLET.
When an alternative type of plug is used it should be fitted with a 5 AMP
FUSE, otherwise the circuit should be protected by a5 AMP FUSE at the
distribution board.
How to replace the fuse.
Open the fuse compartment with the
screwdriver blade
and replace the fuse.
FUSE