Connecting A Vcr - Sony TRINITRON KV-14M1A Manual

8
Connecting a VCR
. Tl)
Ly
6 =
¢ It is recommended to tune in the VCR signal to
programme number "0". For details, see "Presetting
Channels Manually" on page 13. _
Presetting Channels
Automatically
TV searches for all available
channels. If manual tuning is
preferred see Menu option -
Presetting Channels Manually.
1 Plug into mains. .
Depress power switch © B§ on TV set.
2 Press and hold on TV set until
auto tuning starts and screen shows.
Note * When Auto tuning stops the programme on
position 1 is seen.
Getting Started
TV Operation
TV Operation
This section explains functions used whilst watching TV. Most operations are carried
out using the Remote Commander.
To
Switch on
Switch off temporarily
Switch on again
Switch off completely
Select programmes
Display the programme number
Adjust the volume
Mute the sound
View video input
View programmes in 16:9 mode
Press
O Eon TV
o@
TV is now in standby mode, © indicator WY on
TV lights.
COG, PROGR +/-@ WJ or any number
button ®
© Ed on TV
To save energy we recommend switching off
completely when TV ts not in use.
PROGR +/- @W or number buttons ®
For double digit numbers press -/-- @ then the
number e.g. For 23, press -/--@ then 2 and 3.
@
Press again to make programme number
disappear.
—+/- ON
xk @
Press again to restore sound.
~) 08
Press again to return to TV programme.
2 @
Press again to return to 4:3 mode.
Note ¢ 4+ @ is to be used to optimise the
viewing of 16:9 signals which will
be available in the future.
TV Operation 9