Connecting the Aerial and VCR
• Use the supplied main lead (Type BF, see page 10).
• Use one of the supplied coaxial cable for aerial connection, and the other one for digital connection.
VCR
IN
OUT
For more details regarding VCR connection, refer to
"Connecting Equipment to the TV" on page 50.
Stabilizing the TV set
After setting up, secure the TV set to a wall, pillar,
etc, using the supplied anchor attachments, for safety
purposes.
1
Remove the two screws attached to the upper rear side
of the TV set.
2
Replace the two screws with the two supplied anchor
attachments.
3
Secure a wall anchor bracket (not supplied) to a solid wall or
pillar.
4
Pass a strong cord or chain through both holes of the anchor
attachments and then secure to a wall or pillar, etc.
or
Overview & Installation
GB
15