Table of Contents
Advertisement
6.3 INTEGRATOR MODE
Integrator mode has the following two functions.
1. Setting picture quality when [VIVID] is selected for [COLOR
MODE].
2. [ODD] and [LAMP LIFE] time display
Activating Integrator Mode
1. Hold the [SET] key pressed in Standby status (main power ON
and the standby LED lit in amber).
2. The standby LED goes dark after approx. 2 seconds (no LED lit).
3. Release the [SET] key, and the standby LED will flash twice (for
approx. 2 seconds). While the LED is flashing, press the
[STANDBY/ON] key to start up the unit.
4. After the normal STARTING UP process is completed, the initial
display of Integrator mode appears.
Note : If no picture appears as described in step 4, once resume
Standby status and repeat the above procedure.
If more than two seconds has been elapsed before starting up
the unit in step 2, repeat the procedure from step 1.
Initial Display of Integrator Mode
SYSTEM
SET UP
COLOR
MODE
HOUR
METER
:
NEXT MENU
If an appropriate signal input is available at COMP1 or COMP2.
The [COLOR MODE] parameter adjustment menu can be selected
only when either the COMP1 or COMP2 input is selected and a
proper signal (one that conforms to XG10) is being supplied to the
selected input. This is because the unit is designed so that the
[COLOR MODE] settings are effective only for picture quality for
a signal input via the COMP inputs. Similarity, the menu cannot be
selected if no appropriate signal is being supplied, as these
adjustments must be made while observing changes in the picture
quality.
For the menu operations, use the menu keys.
Key functions in Integrator mode
[MENU]:
Terminates Integrator mode.
[SET]:
Returns you to the previous layer.
Menu Up:
Moves the setting and adjustment item selection
upward.
Menu Down: Moves the setting and adjustment item selection
downward.
Menu Right: Proceeds the menu layer by one, increases the setting
value, or selects "NO."
Menu Left:
Decreases the setting value, or selects "YES."
RVD-XG10, RVD-XG10ED, RVA-VK10
SYSTEM
SET UP
COLOR
MODE
HOUR
METER
:
NEXT MENU
If a video signal, no signal or a nonconforming signal is being
supplied.
79
Advertisement
Table of Contents
