Important Information; Unpack The Appliance; Before Operating; Condition Of Unit - Sharp SWB3085HS Operation Manual

UNPACK THE APPLIANCE

Remove all packing materials from inside the appliance. Remove
the feature sticker, if there is one, from the outside of the appli-
ance. Check the appliance for any damage, such as misaligned
or bent drawer, damaged drawer seals and sealing surfaces,
broken or loose drawer guides and dents inside the cavity or
on the front side of the appliance. If there is any damage, do
not operate the appliance and contact your dealer or a Sharp
Authorized Servicer.
IMPORTANT: DO NOT REMOVE THE WAVEGUIDE
COVER LOCATED ON THE TOP OF THE SHARP MICRO-
WAVE DRAWER .
™
WAVEguIDE
COVER

BEFORE OPERATING

• Read and understand all instructions in this Operation
Manual.
• Ensure the appliance is properly installed and connected to
power according to all instructions in the included Installa-
tion Manual.
• Ensure all protective packaging materials and tape have been
completely and correctly removed.

CONDITION OF UNIT

Do not operate any appliance with a damaged cord or after the
appliance malfunctions or has been damaged in any manner.
Return the appliance to the nearest authorized service facility
for examination, repair or adjustment.

SERVICE AND REPAIR WARNING

Do not repair or replace any part of this appliance. If the display,
oven or touch controls fail, consult a Sharp Authorized Servicer.

RADIO OR TV INTERFERENCE

If any interference to your radio or TV is caused by the Sharp
appliance, check if the appliance is on a different electrical
circuit, relocate the radio or TV as far away from the appliance
as feasible or check position and signal of receiving antenna.

IMPORTANT INFORMATION

GROUNDING
INSTRUCTIONS
This unit must be supplied with the proper voltage and frequency
and connected to an individual, properly grounded branch
circuit, protected by a circuit breaker or fuse having amperage
as noted on the rating plate. A 208/240V AC, 60Hz, 3-wire or
4-wire, single-phase power supply must be used.
NOTE: Check local codes for required breaker size. All electri-
cal wiring and hookup for this unit must be done by a qualified
electrician. Make note of the location of the main appliance
disconnect.
Improper use of the grounding plug can result
WARNING
in a risk of electric shock. Do not use an extension cord. If the
power supply cord is too short, have a qualified electrician or
serviceman install an outlet near the appliance.
If you have any questions about the grounding or electrical
instructions, consult a qualified electrician or service person.

PRODUCT DISPOSAL

This product may not be treated as household waste. To dispose
of the appliance, deliver it to an applicable collection point for
the recycling of electrical and electronic equipment. Dispose
of this product correctly to prevent negative consequences for
the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. For
more detailed information about recycling of this product, please
contact your local city office, your household waste disposal
service or the shop where you purchased the product.
11 E