Selecting The Format For Recording (Recording Mode); Changing How The Pedal Effects Are Applied (Damper Pedal Part); Changing How The Pedals Work (Center Pedal); Preventing Doubled Notes When Connected To A Sequencer (Local Control) - Roland DP90e Owner's Manual

Various Settings (Function Mode)
Indication Value

Selecting the Format for Recording (Recording Mode)

You can choose whether to record as SMF or as audio.
Rec Mode
MEMO
You can also switch the recording mode by holding down the [
SMF
Audio

Changing How the Pedal Effects Are Applied (Damper Pedal Part)

When you press the damper pedal during Dual play or Split play, the pedal effect is normally applied to both tones, but you can also select the tone
to which the effect is to be applied.
DPdl Prt (*1)
R+L
R
L

Changing How the Pedals Work (Center Pedal)

When you turn on the power, the center pedal functions as the sostenuto pedal (p. 10).
You can change the function of the pedal to a variety of other operations.
SOST
CPdl Fnc
PLAY
LAYR
OCT

Preventing Doubled Notes When Connected to a Sequencer (Local Control)

When you have a MIDI sequencer connected via USB, set this parameter to Local Off.
Since most sequencers have their Thru function turned on, notes you play on the
keyboard may be sounded in duplicate, or get dropped. To prevent this, you can
enable the "Local Off" setting so that the keyboard and internal sound generator will be
disconnected.
LocalCtl
OFF
ON

MIDI Transmit Channel Settings (MIDI Transmit Channel)

This setting specifies the MIDI channel on which the unit will transmit.
MIDI Ch (*1)
MIDI uses sixteen "MIDI channels, " which are numbered 1 through 16. By connecting MIDI devices (USB MIDI) and specifying the appropriate MIDI
channel for each device, you can play or select sounds on those devices.
The unit will receive all sixteen channels (1–16).
OFF, 1–16

Renaming a Song (Save Song)

SaveSong
Here's how to rename a song you've saved (p. 38).

Copying a Saved Song (Copy Song)

CopySong
A song you've saved to the internal memory can be copied to the USB flash drive. Alternatively, a song saved to the USB flash drive can be copied to
the internal memory. (p. 40)

Deleting a Saved Song (Delete Song)

Del Song
You can delete a saved song from the internal memory or the USB flash drive. (p. 40)

Initializing the Memory (Format Media)

Format
You can delete all songs from the internal memory or a separately sold USB flash drive. (p. 41)
48
Explanation
SMF parts will be recorded separately. This allows you to re-record just a single part, or to overdub different parts.
The recording will be made as audio data. The recorded song can be used in your computer.
All enabled
Applied only to the Tone 1 (in dual mode)/Right-hand Tone (in split mode)
Applied only to the Tone 2 (in dual mode)/Left-hand Tone (in split mode)
Sets function to sostenuto pedal.
The pedal will have the same function as the [
Pressing the pedal will layer on Tone 2, used for Dual play.
* The Layer function can be applied only when using Dual play.
Pressing the pedal will layer on a sound one octave higher.
* The Octave function cannot be applied while using Twin Piano, Dual play, or Split play.
Local Control is off.
The keyboard and composer are disconnected from the internal sound generator. Playing the keyboard will not produce sound.
Local Control is on.
The keyboard and composer are connected to the internal sound generator.
] (Rec) button and using the [–] [+] buttons.
] (Play/Stop) button.
Local Control
Sound Generator
MIDI
USB MIDI
Sequencer
In
USB MIDI
Out