Midea MDP18B10AWWC User Manual page 32

Problem
The dishes aren't
drying
WARNING
Self-repair or non-professional repair may cause serious risks to the safety of the user
of the appliance and impact warranty.
ERROR CODES
If there is a malfunction the dishwasher will display an error code. The following table
shows possible error codes and their causes.
Problem
E1
E3
E4
WARNING
If overflow occurs, turn off the main water supply before calling a service.
●
If there is water in the base pan because of an overfill or small leak, the water should
●
be removed before restarting the dishwasher.
If there is an error code that cannot be solved, please request professional assistance.
●
Possible reason
Improper loading
●
Too little rinse-aid
●
Dishes are removed
●
too soon
Wrong program has
●
been selected.
Use of cutlery with a
●
low-quality coating.
Possible reason
Longer inlet time.
●
Not reaching required
●
temperature.
Overflow.
●
Solution
Use gloves if detergent residue can
be found on dishes to avoid skin
irritations.
Increase the amount of rinse-aid/refill
the rinse-aid dispenser.
Do not empty your dishwasher
immediately after washing. Open
the door slightly so that the steam
can come out. Take out the dishes
until the inside temperature is safe
to touch. Unload the lower basket
first to prevent the dropping water
from the upper basket.
With a short program, the
washing temperature is lower,
decreasing cleaning performance.
Choose a program with a long
washing time.
Water drainage is more difficult with
these items. Cutlery or dishes of this
type are not suitable for washing in
the dishwasher.
Solution
Faucets is not opened, or water
intake is restricted, or water
pressure is too low.
Malfunction of heating element.
Some element of dishwasher leaks.
31