Midea MDP18B10AWWC User Manual page 14

Water Supply And Drain
Connect the unicouple to the faucet
Attach the unicouple to the faucet adapter following
the three steps below:
1. Depress the locking collar at the top of the
unicouple.
2. Place the unicouple completely over the faucet
adapter.
3. Release the locking collar. The unicouple should
now be locked onto the faucet adapter.
Remove unicouple from faucet
1. Turn off cold water.
2. Relieve water pressure from the unicouple
assembly before disconnecting it from the
faucet by depressing the red pressure relief
button on the unicouple.
3. Depress the locking collar and remove the
unicouple from the faucet.
Depress red button to
release water pressure
Depress collar to
release unicouple
from faucet
13
Collar