Table of Contents
Advertisement
4 INSTALLATION
4.3
Mains supply
NOTE!
Mains supply requirements
This equipment complies with IEC 61000-3-12 provided that the short-circuit power
is greater than or equal to S
and the public system. It is the responsibility of the installer or user of the equipment
to ensure, by consultation with the distribution network operator if necessary, that
the equipment is connected only to a supply with a short-circuit power greater than
or equal to S
scmin
The power source is delivered with a 4×2.5 mm2 mains cable and 16 A mains plug which in
combination can handle the rated data given for 3-phase 380–415 V mains supply.
1.
Rating plate with supply
connection data
Recommended fuse sizes and minimum cable area
Mains voltage
Input current at maximum output
Maximum recommended fuse
breaker rating
0463 605 001
at the interface point between the user's supply
scmin
. Refer to the technical data in the TECHNICAL DATA chapter.
1)
or circuit
- 12 -
3~ 50/60 Hz
400 V ±10%
18 A
16 A
© ESAB AB 2023
Advertisement
Table of Contents
