Table of Contents
Advertisement
6
6-1
General information
The system and installation of the appliance must comply with existing UNI-CIG 8723 regulations and
Italian Ministerial Decree dated 12 April 1996.
Appliance installation and maintenance must be carried out by qualified and authorized personnel,
who must comply with the safety regulations applicable in the country where the appliance is to be installed.
6-2
Storage
If the appliance is stored in a warehouse at temperatures below 0°C, bring it to a temperature of at least
+10°C before use.
6-3
Packaging
The appliance is usually packaged and shipped
with all parts already assembled; therefore, when
delivered, assembly is not necessary. The stainless
steel parts and all framework panels are protected
by an adhesive, scratch-resistant film.
The appliance is packaged inside a special wooden
frame and placed on a pallet.
The packed appliance must be handled with care
and kept in the correct position, according to the
symbols present on the packaging.
During unpacking, ensure the appliance is in order
and has all its components. When removing the
scratch-resistant film, take care not to leave pieces
of adhesive film on the panels.
It is advisable not to remove the packaging until
the appliance is to be used so as to guarantee
preservation of the same.
WARNING
Do not use cutters or any other sharp tools when unpacking . They may scratch the appliance
surfaces irreparably .
WARNING
Packaging materials must be disposed of in compliance with the regulations applicable in the
country where the appliance is to be installed . The various types of material must be separated
and taken to special collection centres .
Always comply with environmental protection regulations .
32
Instructions for qualified fitters
GAS PASTA COOKER - LADY 900
Fig. 11 Packaging
© Copyright 2015
Advertisement
Table of Contents
