Table of Contents
Advertisement
11. KARTA GWARANCYJNA/ REKLAMACJE
Produkt objęty jest 24-miesięczną gwarancją. Warunki gwarancji można znaleźć na
stronie: https://xblitz.pl/gwarancja/
Reklamacje należy zgłaszać za pomocą formularza reklamacyjnego znajdującego się
pod adresem: http://reklamacje.kgktrade.pl/
Szczegóły, kontakt oraz adres serwisu można znaleźć na stronie: www.xblitz.pl.
Specyfikacje i zawartość zestawu mogą ulec zmianie bez powiadomienia. Przepra-
szamy za wszelkie niedogodności.
KGK Trend deklaruje, że urządzenie XBLITZ X7 GPS jest zgodne z istotnymi wymaga-
niami dyrektywy 2014/53/EU. Tekst deklaracji można znaleźć pod linkiem:
https://xblitz.pl/download/DOC/deklaracja-CE-Xblitz-X7GPS.pdf
EN
USER MANUAL
VIDEO RECORDER
Carefully read the enclosed operating instructions and safety notes before use to
avoid accidental damage to the equipment or unintentional injury.
PURPOSE OF THE PRODUCT
The Xblitz X7 GPS car camera allows you to monitor the route, position and speed
of your vehicle and record any traffic incidents. This video recorder is made of the
highest quality components.
01. KIT
1. Video recorder
2. Windshield mounting bracket
3. Charger
4. Operating instructions
5. USB SD card reader
02. PRODUCT DESCRIPTION
SEE FIGURES A, B, C, D
1. M button - to return to the menu and browse files or switch between
menu tabs
2. Selection list button - to launch the main menu and switch between menu
tabs
3. OK button - used to confirm operations and to start and stop the device
12
4. Up button - additional function during recording: press to manually secure
the recording
5. Down button
6. Microphone
7. Reset
8. Memory card slot
9. Handle
10. Lens
03. BEFORE USE
1. It is recommended to use original microSD cards of class 10 or higher.
2. Before inserting the card into the recorder, it must be formatted on the
computer in the FAT32 or exFAT file system (depending on the card) and
then in the recorder.
3. The camera must be switched off when inserting the memory card,
otherwise the card and the device may be damaged. The same applies when
removing the card from the device.
4. When the memory card fills up, the oldest unprotected recordings will be
overwritten if the RECORDING IN BAND function is activated.
5. It is recommended that the G - SENSOR option is set to the minimum to avo-
id securing unnecessary material and thus losing space on the memory card.
6. Sound: the device has a condenser microphone that records all ambient
sounds. Sounds may overlap causing distortion.
04. MONTAGE
SEE FIG. E
1. Select and clean the camera mounting location.
2. Mount the camera mount.
3. Insert the memory card into the slot in the camera.
4. Place the camera in the mount.
5. Point the camera lens towards the roadway.
6. Connect the power supply to the camera.
7. Route the power supply cable so that it does not obstruct your view while
driving (see Fig. E).
8. Plug the power supply plug into the car's cigarette lighter socket.
05. MENU FUNCTIONS
First setting tab (single-press selection list)
1. Loop recording: Off / 1min / 2min / 5min - Allows you to set the length of
video file recordings. If this function is disabled, new recordings will not
overwrite old ones when the memory card is full.
13
Advertisement
Table of Contents
