Westinghouse WH3250RVC Owner's Manual page 14

ASSEMBLY
3. Install the mounting foot to the frame using M8
flange bolts and nuts.
2
3
Figure 5 – Assemble Mounting Foot to Frame
1 - Rubber Pads
2 - Mounting Foot
4. Install the 16 mm x 105 mm axle pin through the
axle bracket on the frame.
5. Install the hairpin cotter through the axle pin.
1
Figure 6 – Assemble Wheels to Frame
1 - Axle Pin
14
3
1
3 - M8 Flange Bolt
and Nut
2
2 - Hairpin Cotter
6. Install the handles using the clevis pin and hairpin
cotter as shown in Figure 7.
1
2
Figure 7 – Attaching the Handles
1 - Clevis Pin
2 - Handle
3
4
3 - Hairpin Cotter
4 - Negative Battery
Cable