Table of Contents
Advertisement
Display
Setting
Power limitation
Enables the total power of the hob to be lim-
ited, if necessary, based on the conditions of
your electrical installation. The available set-
tings depend on the maximum power of the
hob. You can find precise information on the
rating plate. If the function is active and the
hob has reached the set power limit,
played and you cannot select a higher power
level.
Time for selecting the cooking zone
Cookware test
You can use this function to test the quality
of the cookware.
Automatic management with power limitation
Restoring factory settings
Factory setting
1
14.2 To go to the basic settings
Requirement: The hob must be switched off.
To switch on the hob, touch
1.
Within the next 10 seconds, press and hold
2.
four seconds.
Product information
Directory for the technical after-sales
service (TK)
Production number
Production number 1
Production number 2
a The first four displays provide the product informa-
tion. Touch
or
to view the individual displays.
Cookware test
15 Cookware test
The quality of the cookware has a major influence on
the speed and the result of the cooking process.
You can use this function to test the quality of the cook-
ware.
Before the test, ensure that the diameter of the cook-
ware base corresponds to the diameter of the cooking
zone being used.
Access is via the basic settings. → Page 18
15.1 Procedure for checking the cookware
Set the cookware at room temperature with approx.
1.
200 ml water in the centre of the cooking zone
whose diameter best fits the diameter of the base of
the cookware.
Call up the basic settings and select .
2.
is dis-
.
for
Display
.
.
Value
- Switched off. Maximum power of the hob
- 1000 W. Lowest power setting.
. - 1500 W.
...
- 3000 W. Recommended for 13 A.
. - 3500 W. Recommended for 16 A.
- 4000 W.
. - 4500 W. Recommended for 20 A.
...
- Maximum power of the hob.
- Unlimited: You can adjust the last selected cooking
zone without having to select it again.
– Limited: You can adjust the last selected cooking
zone within 10 seconds after selecting it. After this time,
you must select the cooking zone again before adjusting
it.
- Not suitable.
- Not optimal.
- Suitable.
- Deactivated: Does not show the power limit unless
1
is activated.
- Switched on: Always displays the power limit.
1
- Individual settings
.
- Factory settings.
Touch
to access the basic settings.
3.
a
and
light up alternately as well as as a preset
value.
Touch
repeatedly until the desired setting ap-
4.
pears.
Use
or
to select the required value.
5.
Touch and hold
6.
a The settings are saved.
14.3 Exiting the basic settings
To exit the basic settings and and switch off the
▶
hob, touch
.
Touch or . The
3.
zones.
a The function has been activated.
a After 20 seconds, the result appears in the cooking
zone displays.
15.2 Checking the result
In the following table, you can check the result for the
quality and speed of the cooking process:
Cookware test en
1
.
1
for four seconds.
display flashes in the cooking
19
Advertisement
Table of Contents
